Matterport is the right choice for most commercial interiors needing a BIM-ready point cloud — it's faster to capture and produces accuracy within about 1%, which meets LOD 300 requirements for the large majority of construction documentation. Dedicated survey-grade...
A Matterport scan becomes a BIM model in four stages: capture, point cloud registration, dimensional QA, and model authoring in Revit or a comparable platform. For most commercial buildings, that path runs five to ten business days from scan day to a validated LOD...
A restoration scan follows the same per-square-foot pricing P3D uses for every scan: typically $0.10 to $0.25 per square foot for standard scans, with large or unusually complex spaces priced differently. A single-family loss usually lands in the low hundreds of...
Pre-loss and post-loss scanning builds a defensible claim record when the baseline scan is captured before any damage occurs and the second scan is captured within days of the loss, with both files kept unaltered and time-stamped. The strength of the record comes from...
Insurance adjuster 3D documentation holds up when it is measurable, timestamped, and delivered in a format that opens without special software. A Matterport scan captures dimensions, existing conditions, and damage extent in one file an adjuster can review from a desk...
A Matterport scan speeds up restoration scoping by putting an accurate, measurable copy of the damaged space in front of every reviewer at once. Instead of scheduling separate walkthroughs for the estimator, the adjuster, and the contractor, one scan gives all three...
Reality capture gives restoration contractors and insurance professionals a shared, accurate record of a loss from the first site visit through claim close. It speeds up scoping, keeps the contractor and adjuster working from the same information, and supports the...
A Matterport scan to as-built documentation project moves through four steps: capture, point cloud processing, dimensional verification, and CAD or BIM conversion. The full workflow typically runs three to seven business days from scan day to delivery, depending on...
An as-built drawing documents the exact conditions of a building as it exists today — not as it was originally designed. For AEC teams, it matters because design drawings and field conditions almost always diverge once construction, renovation, or years of tenant...
Matterport vs field measure is a real decision for as-built documentation: both produce dimensional data, but they differ in speed, completeness, and what happens if a measurement is questioned later. A scan captures the entire space at once and keeps the raw data on...
Common Matterport as-built conversion mistakes happen at the handoff between the point cloud and the finished drawing — missed ceiling heights, misread door swings, and mechanical or electrical elements that aren't visible in the scan and get left out. Catching them...
One site visit from P3D produces a Matterport tour, point cloud, floor plan, CAD drawing, and Revit model. Here’s what each one is for.
